Hand Tools

Heat Gun  CETL US Approved, 120V, 60Hz, Rate Power: 750 / 1500WTemperature Ⅰ/Ⅱ:300/500℃ – (572-1112°F), Air Flow Ⅰ/Ⅱ: 280 / 480 L/min, UL appro...

1/4″ Sheet Sander 120VAC, 2A  ETL Approved, Rated Current: 2A, Rated Voltage: 120V, Frequency: 60Hz, No Load Speed: 6500/min, Orbital Frequency...

5″ Palm Random Orbital Sander  Self Vacuum Dust Bag 2amp 110v

Jig Saw  ETL Approval, Rated Current: 6.5A, Voltage: 120V, Frequency: 60HZ, No Load Speed: 800-3200r/min, 0-45° Footplate Tilt, Right and Left,...

Reciprocating Saw (Industrial)  CETL US Approved, Rated Current: 9A, Rated Voltage: 120V, Frequency: 60Hz, No Load Speed: 0-2500r/min, With Sel...

Circular Saw (Industrial)  ETL Approval, Rated Current: 11A, Rated Voltage: 120V, Frequency: 60HZ, No Load Speed: 0-4500RPM, Switch: with Lock-...

Impact Drill 120V (Industrial)  UL approved, Rated Current: 6A, Rated Voltage: 120V, Frequency: 60HZ, No Load Speed: 0-2800r/min, Impact Freque...

Angle Grinder (Industrial)  Rater power: 750W, Rated current: 6.5A, Rated Voltage: 110-120V, Frequency: 60Hz, Disc Diameter: 4-1/2″, Spindle Th...

3Pc Adaptor Set  DIN3123, 1/4″, 3/8″, 1/2″, Material: 40CR, Sand Blasted Finish

Screwdriver Bit Holder with Quick Release (Industrial)  2 1/4″, Material: CR-V, Stainless Steel,  Aluminum

2Pc Screwdriver Bit Holder Set  2.4″, Material: Steel, CR-V

3Pc Magnetic Nut Socket Set  Sizes: 1/4″, 5/16″, 3/8″, 40 CR Steel With Magnet, 4″ Quick Release Hex Bits

3/8″ Magnetic Nut Socket Set  40Cr Steel, With Strong Magnet, 1/4″ Quick Release Hex Bits, Length: 1.9″

5/16″ Magnetic Nut Socket Set  40Cr Steel, With Strong Magnet, 1/4″ Quick Release Hex Bits, Length: 1.9″

3pk 1/4″ Magnetic Nut Socket Set  40Cr Steel, With Strong Magnetic,1/4″ Quick Release Hex Bits, Length: 1.8″

14pc Nut Socket Set  CR-V, Heat treatment, Satin Finished Surface, 1/4″x 1.5″ SAE: 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 7/16″, Metric: 5, 5...

5″ Cup Wire Brush W/Nut (Industrial)  Ideal for Removing Rust, Paint and Varnish from Metal Surfaces, Wire Dia: 0.1″

5Pc Wire Brush Set W/Hex Shank  1″ Wire End Brushes with Shank, 2″-3″ Circular Grinding Wire Brush with Shank, 2″-3″ Cup Brush with Shank, Wire...

Cup Brush With Shank  Ideal for Removing Rust, Paint and Varnish from Metal Surfaces, Wire D: 0.1″, Shank D: 1/4”

Wire End Brush With Shank  Ideal for Removing Rust, Paint and Varnish from Metal Surfaces, Wire D: 0.3mm, Shank D: 1/4”

Circular Grinding Wire Brush  Ideal for Removing Rust, Paint and Varnish From Metal Surfaces, Wire D: 0.1″, Shank D: 1/4”

4-1/2″ 120 Grit Zirconia Oxide Flap Disc  120 Grit

4-1/2″ 80 Grit Zirconia Oxide Flap Disc  80 Grit

4-1/2″ 60 Grit Zirconia Oxide Flap Disc  60 Grit